|Type of Product:||Heater assembly|
|Specifications:||Sensor compatibility: Sensor built in, the heater is controlled by a thermoregulator on the side of the module.
Material spec: Plastic
Required flow rate: Set by the pressure switch, this switch will need to be pressurised, if it runs straight to a big bore outlet with no bends, there will be no back pressure and it may not work. Pressure switch operated by an extra cord.
|Compatible With:||Most Chinese spas with a small plumbing change or can be used as a remote heater on a bespoke project|
|Connections & Fixings:||1.5″ white plastic female sockets to connect to plumbing|
Diameter: 50 mm
Between terminals: 120 mm
Overall length complete: 340 mm
|Additional Notes:||High-limit thermal cutout built in. This unit is rated IPX5 and has CE approval.|