Chlorine Reducer 1kg

RRP: £17.23

£14.36

Blue Horizons Chlorine Reducer is used to lower bromine or chlorine levels in pool water after shock treatment procedures or as a problem solver if the pool has been accidentally ‘overdosed’ with chlorine or bromine.

Description

Blue Horizons Chlorine Reducer is used for lowering chlorine or bromine levels in pool water after shock treatment or as a problem solver if the pool has been accidentally ‘overdosed’.


Application Instructions:

  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned “on”, preferably near to the water inlets to aid distribution.
  2. If applying after shock treatment, allow a minimum of 8 hours for shock chlorination to oxidise bather wastes from water before application.
  3. Measure the free chlorine/total bromine level in the water, then using the dosing table below, calculate the total amount required.
  4. Split this total amount into 4 smaller doses. Apply each smaller dose, allowing time to thoroughly circulate (2-3 hours for commercial pools/6-8 hours for domestic pools) before retesting chlorine/bromine level and if necessary adding further doses.

Usage Breakdown:

Spa Volumes Lower Chlorine Levels by
Litres Gallons 1mg/L (1ppm) 2mg/L (2ppm) 3mg/L (3pp)
4,545 1,000 23g 46g 114g
9,090 2,000 45g 91g 227g
22,700 5,000 114g 228g 568g

Additional information

Weight 1 kg
RRP

17.226

Manufacturer

Blue Horizons

Supplier

CPC

Reviews

There are no reviews yet.

Be the first to review “Chlorine Reducer 1kg”

Your email address will not be published. Required fields are marked *