Description
Continuous Protection Against Algae Growth
Algae spores enter pool water constantly through wind, rain, and bather introduction. Left unchecked, a minor bloom can quickly turn clear water green, slippery, and unsafe for swimming. Blue Horizons Algae Controller 2L delivers effective, ongoing protection against algae proliferation, keeping your pool clean, clear, and inviting throughout the swimming season.
Advanced Dual Action Formulation
This concentrated liquid algaecide does more than destroy microscopic algae cells. Its advanced dual-action chemical makeup incorporates built-in clarification agents that bind tiny suspended particles together. Once coagulated, these particles are easily captured by your filtration system, restoring exceptional visual clarity while preventing future spore development.
Enhanced Sanitiser Efficiency
Algae infestations put an enormous demand on primary pool sanitisers, causing free chlorine or bromine levels to deplete rapidly. By applying Blue Horizons Algae Controller as part of your regular maintenance routine, you create a dedicated barrier against organic growth. This reduces total chemical consumption, stabilizes water balance, and allows primary sanitisers to work more effectively.
Key Technical Specifications
Volume: 2 Litres
Chemical Type: Concentrated liquid dual-action algaecide and clarifier
Compatibility: Suitable for all outdoor in-ground and above-ground swimming pools
Sanitiser Compatibility: Works seamlessly with chlorine, bromine, and salt chlorination systems
Primary Target: Green, black, and mustard algae species
Container: 2L recyclable bottle with safety seal cap
Dosing & Application Instructions
Initial Treatment or Pool Opening:
Balance pool water pH to the ideal range of 7.2 to 7.6.
Dose at a rate of 100ml per 10,000 litres (2,200 gallons) of pool water.
Pour the liquid slowly around the perimeter of the pool near return inlets while the pump is running.
Weekly Maintenance Dose:
Add 50ml per 10,000 litres (2,200 gallons) of pool water once per week.
Increase maintenance frequency during periods of high bather usage, severe rain, or hot summer weather.
Severe Algae Destruction (Shock Treatment):
Brush pool walls and floor thoroughly to disturb established algae colonies.
Shock dose the pool with chlorine granules to bring free chlorine levels up.
Apply 250ml of Algae Controller per 10,000 litres of pool water.
Run filtration continuously for 24 to 48 hours until water clarity is restored, then backwash or rinse filter media.
Frequently Asked Questions
How often should I apply Blue Horizons Algae Controller? Apply a maintenance dose once per week to prevent spores from taking root. During hot summer weather or heavy rainfall, a mid-week top-up helps maintain consistent residual protection.
Will this product cause foaming in my pool? No. Blue Horizons Algae Controller features a low-foaming formulation when used at recommended doses, making it ideal for swimming pools fitted with water features or counter-current jets.
Can I swim immediately after adding this algaecide? Allow the pool pump to circulate the chemical through the water for at least 15 to 30 minutes after application before allowing swimmers back into the pool.
Does this product replace normal chlorine or bromine? No. Algaecides work as a preventative shield and supplement, not as a primary sanitiser. You must still maintain a consistent free chlorine level between 1.0 ppm and 3.0 ppm.







Reviews
There are no reviews yet.