Ardex AM 100 Render is a rapid setting one coat tiling render. Pre-blended sand and cement render, requiring only the addition of water to produce a slump-free mortar that can be applied 2-30mm thick and can be tiled in as little as 2 hours.

The Ardex AM 100 can be applied from 2mm up to 30mm thickness in a single coat, and is particularly useful in situations where the drying time and thickness of conventional sand and cement renders cannot be accommodated. This render is suitable for rendering suitably prepared in-situ concrete walls, brickwork and block work. Ardex AM 100 render is suitable for use in internal and external areas, including swimming pools.

Available in 25kg bags

Features:

Tiles can be fixed in as little as 2 hours
Easy to use
Suitable for swimming pools
For internal and external use
Apply 2-30mm in a single application

Technical Data:

According to Ardex quality standards

Bulk density	approx. 1.5kg/litre
Weight of fresh mortar	approx. 1.6kg/litre
Application time (20ºC)	approx. 30 minutes
Ready to receive wall tiling	approx. 2 hours
pH value	Fresh mortar containing cement, approx. 12
COMPRESSIVE STRENGTH
After 1 day	approx. 4 N/mm²
After 7 days	approx. 7 N/mm²
After 28 days	approx. 11 N/mm²
TENSILE BENDING STRENGTH
After 1 day	approx. 1.5 N/mm²
After 7 days	approx. 2 N/mm²
After 28 days	approx. 3 N/mm²

Application:

Apply at temperatures above 5oC.

The Ardex AM 100 should be applied first as a 1-2mm thick skim coat or bonding layer. The remaining required thickness (up to 30mm) is applied fresh-in-fresh.

The material can be applied in two layers if preferred when applying to the deeper thicknesses over larger areas. For example, for a total depth of 30mm, a 25mm thick layer can be applied, allowed to harden, and then followed by a 5mm thick layer. When applying in two layers, ensure the top layer is always thinner than the initial layer.

Downloads:

Data Sheet