Ardex X 60 PU Flex tile adhesive uses a two-part reaction resin for problematic substrates. This flexible adhesive is ideal for fixing all tile types to problematic substrates such as GRP, steel and polyester, and in interior areas sensitive to moisture e.g. particle boards, plywood, plasterboards, gypsum fibre boards, fibre cement boards and plaster slabs.

It is also suitable for adhering natural stone, aluminium and PVC coverings. Ardex X 60 PU Flex is water resistant when fully cured and is easy to apply, with no special tools required. This product is only available in White and the one 3kg box size.

Features:

Ideal for fixing all tile types to problematic substrates such as GRP, steel and PVC coverings
Suitable for use on interior substrates sensitive to moisture, and exterior areas
Rapid curing, can receive light foot traffic and is groutable after approximately 3 hours
45 minute pot life and 60 minute working time
Reliable bond to impermeable, smooth and vibrating substrates.
Easy to apply with no special tools required
Ideal for spas, pools and water features

Technical Data:

According to Ardex quality standards

Material	Polyurethane
Components	Part A and Part B
Working time	60 minutes @ 20°C 50% RH
Colour
Part A	White
Part B	Brown

Application:

After mixing, spread the adhesive in small portions onto the substrate to allow the reaction heat to dissipate. Using a notched trowel, evenly apply as much material that can be tiled within the products 60 minute working time. Place the tiles and adjust them to the correct position.

Do not apply to substrates that have a temperature of less than +10°C.

Downloads:

Data Sheet
Application Guide

Ardex X 60 PU Flex Tile Adhesive

Ardex X 60 PU Flex Tile Adhesive