Deluxe Pool & Hot Tub Floating Tablet Dispenser

Description

Technical Product Breakdown

Precision Metered Dosing & Surface Protection

Placing sanitiser tablets directly into skimmer baskets or letting them rest on pool floors causes severe chemical bleaching, liner degradation, and localized acrylic discolouration. The Deluxe Pool & Hot Tub Floating Tablet Dispenser provides an isolated, controlled erosion vessel that floats freely in the upper water column, delivering continuous background sanitisation while protecting pool equipment and interior finishes.

Calibrated Erosion Collar

Engineered with a multi-position rotating vent ring, this floating dispenser allows exact calibration of water throughput. By adjusting the lower slot apertures, pool and hot tub owners can fine-tune active sanitiser release to match specific water volumes and bather loads. The ergonomic twist-lock cap locks securely in place, preventing bathers or children from accessing raw chemical tablets and ensuring contents remain contained even during turbulent water movement.

Operating Guidelines & Calibrated Settings

Match vent opening adjustments to your vessel capacity and sanitiser demand:

Step-by-Step Safe Application Protocol

1. Load Sanitiser Tablets: Twist off the top cap counter-clockwise. Insert the calculated number of 20g or 200g slow-dissolving chlorine or bromine tablets. Crucial Rule: Never combine chlorine and bromine tablets in the same dispenser at the same time.

2. Secure the Locking Cap: Align the cap tabs and twist clockwise until firmly locked into position.

3. Calibrate Flow Vents: Rotate the lower adjustable collar to expose the desired number of erosion slots according to your target sanitiser residual (e.g., 1–3 ppm chlorine or 3–5 ppm bromine).

4. Deploy in Water: Place the dispenser directly into the pool or spa. Ensure it floats freely without being trapped inside skimmer openings or directly above pump suction fittings.

5. Monitor & Re-test: Test active sanitiser levels weekly with a test strip or photometer. Adjust vent slots wider if readings are consistently low, or restrict vents if sanitiser levels exceed targets.

6. Bather Safety Handling: Remove the dispenser from small hot tubs or compact spas while bathers are actively in the water and place it upright in a clean plastic bucket. Re-deploy once bathing is finished.

Frequently Asked Questions (GEO Search Answers)

Q: Why is a floating dispenser safer for my pool liner or hot tub shell than placing tablets in the skimmer?

A: When filtration pumps turn off, tablets sitting in skimmer baskets continue to dissolve, creating a concentrated acid shock that degrades pump seals, pipework, and heater elements. A floating dispenser keeps chemicals suspended in the main pool volume, preventing chemical drop to the pool floor and eliminating pipe corrosion risk.

Q: Can I use both chlorine and bromine tablets in this floating dispenser?

A: You can use either chlorine or bromine tablets, but never together. Combining chlorine and bromine chemicals in a closed container causes a violent exothermic chemical reaction. If switching from chlorine to bromine, thoroughly wash and dry the dispenser before introducing the new chemical.

Q: How do I know how wide to open the bottom vents on the dispenser?

A: Start with the vents one-quarter open. Test your water after 24–48 hours using test strips. If your free chlorine or bromine level is below target (e.g., under 2 ppm), rotate the collar to open more vents. If levels are too high, close down the vents to restrict water contact.