Blue Cube Pools Swimming Pool Consultancy Package

Call for Price

Building your own swimming pool can save thousands of pounds, but a single mistake in pipe sizing, structural tanking, or plant room design can quickly erase those savings. The Blue Cube Pools Consultancy Package gives self-builders and independent contractors direct access to over 25 years of expert engineering knowledge.

 

✔  3 Scheduled On-Site Visits

✔  Direct ISPE Engineer Phone Support

✔  Plant Room & Equipment Procurement Design

✔  Full Regulatory Compliance

Description

The Biggest Risk in a DIY Pool Build Isn’t Digging the Hole, It’s What Happens Underground

Building a self-build pool or managing your own contractors is one of the most rewarding home improvement projects you can undertake. It lets you create a luxury asset while saving thousands compared to a fully managed installation. However, most self-builders share the exact same fear: “What if I mess up the plumbing, size the pump wrong, or violate a building regulation that ruins the pool later?”

The Blue Cube Pools DIY Consultancy Package acts as your personal insurance policy. Backed by over 25 years of hands-on design and installation experience, our accredited engineers guide you through every stage, from turning the first sod to commissioning the plant room. We remove the guesswork so you can build with total confidence.

What’s Included in Your Consultancy Package

  • 3 Strategic Site Visits:

    • Visit 1 (Pre-Works Recommended): Finalising layout, ground conditions, depth profiles, and plant room positioning before excavation begins.

    • Visits 2 & 3 (Flexible Timing): Used whenever you need them most—whether that’s inspecting blockwork and pipe runs prior to backfilling, checking tanking/liner prep, or commissioning equipment.

  • Complete Phone & Technical Support: You are never left stuck on site. Our technical team is a phone call away to answer questions, resolve unexpected ground challenges, or advise your tradespeople.

  • Plant Room Hydraulic Design: The plant room is the heart and lungs of your pool. We design the exact circulation, filtration, pipe sizing, and heating setup required for your specific pool volume—preventing stagnant water, high energy bills, or noisy pumps.

  • Material & Equipment Procurement: We help you select and source the right liners, tiles, copings, and heating systems (heat pumps, heat exchangers) suited to your budget, passing on our industry knowledge so you don’t overpay for the wrong spec.

  • Standards & Regulations Compliance: Complete peace of mind knowing your build aligns with British Standards, SPATA, BISHTA, PWTAG recommendations, IET electrical regulations, and Gas Safety/OFTEC guidelines.

Supporting Larger & Commercial Builds

Are you a general building contractor or developer looking to construct a domestic or commercial pool for a client? We regularly act as specialist sub-consultants to guide main contractors through complex aquatic engineering requirements. Additional face-to-face meetings and extended site presence can be added based on project scope and location.

Package Summary Sheet

Service Category Package Details
Consultancy Provider Blue Cube Pools
Engineer Accreditation Institute of Swimming Pool Engineers (ISPE)
Site Visits Included 3 Visits (Scheduled at key build stages)
Phone Support Unlimited technical phone support throughout the build
Design Coverage Hydraulics, pipework, plant room layout, heating, and finishes
Regulatory Compliance SPATA, BISHTA, PWTAG, IET, Gas Safety, OFTEC
Supported Pool Types Liner pools, tiled pools, exercise pools, and tiled spas
Pricing Note Package price depends on site location. Additional visits available on request.

Reviews

There are no reviews yet.

Be the first to review “Blue Cube Pools Swimming Pool Consultancy Package”

Your email address will not be published. Required fields are marked *