Coverstar Submersible Pump

The Coverstar submersible pump is used to remove excess water which has gathered on the pool cover material. It has an electronic sensor so that when left on the pool cover it will start automatically when required.

Features Include:

• The electric pump totally constructed in thermoplastic water-resistant material.
• Motor, motor shaft and hardware in stainless steel.
• Triple interposed ring seal with oil pre-chamber.
• Integrated float for automatic operation, inserted in special housing accessible for seasonal cleaning when required.
• Continuous duty asynchronous submersible motor.
• Stator inserted in a stainless steel enclosure and covered with a cap to enclose wiring and capacitor.
• IP68 Protection rating
• Insulation class
• Supply voltage: single-phase 230V 50Hz
• Supplied with 10 metres of cable and schuko socket, 10 metres of cord to facilitate positioning above covers.
• A multi-hose fitting with clapet valve to simplify installation further (1″, 1 1/4″, 1 1/2″ hosetail).
• The hose is not supplied