Description
Elecro Nano Splasher Heater is easy to install with plug-and-play. Robust, durable construction, perfect for heating above-ground pools. Analogue control with 1C differential. Ultra reliable flow switch allows safe operation with 1000 ltr/hr. 316 stainless steel flow tube. May be floor or vertically mounted.
The heater can be vertically wall-mounted or stand on the floor with the control components on the top face casing. Screw fit adapters are supplied to allow connection to standard above-ground pool flexible pipe work, while the water inlet and outlet fittings can be connected to either metric or imperial standard pipes.
The Elecro Nano splasher heater features its unique and proven coiled heating element technology whereby a turbulent vortex is created in the water flow. This delivers outstanding efficiency and extended life expectancy by preventing the build-up of mineral deposits on the heating element.
Robust and reliable, this heater is made to last, affording you the perfect pool temperature with easy-to-use controls.
Features:
- Available as 2kW or 3kW
- Plug and play – 230v single phase 13amp load
- Easy installation, fully equipped and pre-wired
- Robust, durable construction
- Ultra-reliable flow switch allows safe operation
- Supplied with temperature thermostat and overheating sensor
- Compact, durable design
- Can be used in saltwater
- Safety thermal cut-out included (manual reset)
- Flow switch – no pump interlock required
- 2m power cord with UK plug
- Analogue control with 1.2°C differential
- Titanium flow tube and titanium heating element
- Can be floor or vertically wall-mounted
- 100% efficiency throughout the product life
- Silent operation
Technical Information:
Power Output | 2kW | 3kW |
Amp | 9 | 13 |
Net Weight | 18.6kg | 18.6kg |
Gross Weight | 22.5kg | 22.5kg |
Volume | 0.125m³ | 0.125m³ |
Specification:
Weight | 50 kg |
---|---|
Dimensions | 150 × 150 × 150 cm |
Power Supply | 220-240V single phase |
Flow Requirements | Minimum flow: 1m³/h Maximum flow: 17m³/h |
Heating Element | Grade 1 titanium |
Flow Tube | Grade 1 titanium |
Control Thermostat | Analogue: 0>45°C (1.2°C differential) |
Safety Thermal Cut Out | 60°C (manual reset) |
Flow Switch | Gold tipped reed switch with titanium fulcrum pin |
Relay | Surface mount DPDT Finder 66.82.8.230.0000 |
Seals | High temperature special formula EPDM ferrules, TPE end fitting gaskets |
Water Connections | 1.5″ BSP female thread supplied with 1½” / 50mm stepped ABS unions for rigid pipe and 1½” / 1¼” stepped hose tails for flexible pipe |
Ingress Protection Rating | IP44 |
Frequency | 50/60 Hz |
Working Pressure | 4 bar maximum |
Mounting | Floor or wall mounting |
Safety and equipment protection is provided by a flow switch that operates from as low as 1000 litres per hour. Over-heating protection is provided by a thermal cut-out with manual reset.
Downloads:
Warranty:
2 years warranty
Reviews
There are no reviews yet.