Thermalec Electric Pool Heaters

Description

Thermalec electric pool heaters are specifically designed for use with swimming pools and spas. The base of the heater is a fusion epoxy-coated cast iron vessel through which the water from the swimming pool flows. The vessel is fitted with a safety pressure relief valve, a drain valve and the water inlet and outlet nozzles and its base is designed to support the heater on a flat, solid surface. Four screws are supplied to enable the heater to be levelled.

Thermalec electric pool heaters are cast in iron, with a heavy fusion bonded epoxy coating impervious to chemically treated pool water. Set to operate at the maximum normal working pressure of 30psi (2.1kg/cm2) giving protection to both the heater and the installation as a whole against overpressure. A 1/2″ drain valve at the lowest point allows the heater to be left empty in winter. Flow connections consist of easily removable uPVC stub flanges into which the pipes may be fitted using suitable adhesive, as the flanges can be released easily from the heater no unions are required, nor is any form of heat sink needed. The flow direction is from left to right but may be reversed quite simply on-site following the installation instructions.

As a safety precaution, Thermalec electric pool heaters are provided with an interlock relay, which must be connected to the filter pump control circuit. The heater will not operate unless the interlock is wired and the filter pump is energised. 15kW – 36kW models also feature a mains circuit breaker.

Technical Data: 

Downloads:

Info Sheets:
3kW – 12kW | 15kW – 24kW | 30kW – 36kW | 48kW – 72kW

User Manuals:
3kW – 12kW | 15kW – 24kW | 30kW – 36kW | 48kW – 72kW

Warranty:

2 years warranty

The warranty does not cover damage caused by incorrect commissioning & maintenance or by other neglect of the heater.