Thermalec Heater 24kW – 1/3 Phase

RRP: £4,158.00

£3,465.00

Description

This Thermalec 24kW electric pool heater is specifically designed for use with swimming pools and spas. The base of the heater is a fusion epoxy-coated cast iron vessel through which the water from the swimming pool flows. The vessel is fitted with a safety pressure relief valve, a drain valve and the water inlet and outlet nozzles and its base is designed to support the heater on a flat, solid surface. Four screws are supplied to enable the heater to be levelled.

The Thermalec Heater 24kW is single phase only. The flow direction is from left to right but may be reversed quite simply on-site following the installation instructions.

As a safety precaution, Thermalec electric pool heaters are provided with an interlock relay, which must be connected to the filter pump control circuit. The heater will not operate unless the interlock is wired and the filter pump is energised. This model also features a mains circuit breaker.


Features:

• Robust – Built from cast iron
• Economy through efficiency
• Low Watt density heating elements
• Does not require regular cleaning or descaling
• Running cost will not increase with time
• Thermal efficiency for life
• Thermalec heaters have a two-year guarantee.


Technical Data:

24kW
Dimensions 670 x 450 x 250 mm
Weight 47 kg
Maximum I/min
(hard water)
300
Maximum I/min
(soft water)
150
Minimum l/min. 36
Electrical Phase 230V/1ph/50Hz or
400V/3ph/50Hz
Current Amps
1-ph/3-ph
105/35

Downloads:

Info Sheet

Manual


Warranty:

2 years warranty

The warranty does not cover damage caused by incorrect commissioning & maintenance or by other neglect of the heater.

Additional information

RRP

4158

Manufacturer

Thermalec

Supplier

Certikin

Reviews

There are no reviews yet.

Be the first to review “Thermalec Heater 24kW – 1/3 Phase”

Your email address will not be published. Required fields are marked *